Vermeer SC252
TND 49,170.000
آلة قطع الجذامير
2004
3.001 متر / ساعة
إيطاليا، Rome
تم بيع إعلان آلة قطع الجذامير Vermeer SC852 وهو غير مدرج في البحث!
إعلانات مماثلة
Vermeer SC252
TND 49,170.000
آلة قطع الجذامير
2004
3.001 متر / ساعة
إيطاليا، Rome
Rayco RG35 4x4
TND 61,040.000
آلة قطع الجذامير
2016
900 متر / ساعة
بولندا، Mazańcowice
جديد Stiler FREZARKA DO PNI 13,5KM SPALINOWA, STUMP GRINDER 13,5 HP 40CM
TND 7,354.000
آلة قطع الجذامير
2024
15 حصان (11.03 kW)
بولندا، Sokołów Podlaski
جديد Cedrus CEDRUS FR01 FREZ FREZARKA DO USUWANIA PNI KORZENI KARCZOWNIK DRZ
TND 4,428.000
آلة قطع الجذامير
2026
15 حصان (11.03 kW)
بولندا، Opalenica
FSI B28
TND 40,700.000
آلة قطع الجذامير
2010
1.600 متر / ساعة
رومانيا، Borș
مباعة











1/11
الماركة:
Vermeer
الموديل:
SC852
الفئة:
آلة قطع الجذامير
سنة التصنيع:
2008-06
عدد ساعات التشغيل:
2.600 متر / ساعة
الموقع:
بولندا
Bielsko-Biała
تاريخ النشر:
أكثر من شهر واحد
Agroline ID:
FF49393
المحرك
الماركة:
Cummins
القوة:
85 حصان (62.48 kW)
وقود:
ديزل / مازوت
توربو
حالة المركبة
حالة المركبة:
جديدة
معلومات إضافية
اللون:
أصفر
إعلانات مماثلة















plus a rear-mounted drive function.
The machine is in continuous operation after a major overhaul, which included:
Complete engine repair: -
New engine block
- Cylinder head reconditioning
- Surface planing
- Leakage test
- Replacement of valves, valve guides, and valve seals -
Replacement of valve springs
3. Reconditioning of connecting rods - Replacement of connecting rod bushings - Alignment check
4. Crankshaft regrinding (plus 0.25)
5. New set of bearings
6. New oil pump
7. Reconditioning of fuel system - New injector nozzles - Reconditioning of injection pump
8. New water pump with thermostat.
9. New cylinder head studs.
Additionally, we performed the following work on the milling machine:
1. Sandblasting and painting all components with polyurethane paint.
2. Reconditioning the milling head, including: - replacing the rotor blades - replacing all bushings and pins - repairing all broken holes
3. Replacing all the machine's working hydraulic hoses.
4. Reconditioning the steering axle - replacing the steering knuckle bearings - re-sleeving the axle pin - replacing the tires
5. Re-sleeving the blade.
Every pin and bushing in the machine was replaced. All operating fluids and filters, including the hydraulic oil, were replaced.
The machine was run in again for several days to detect any leaks and break in the engine – now in continuous operation.
Ready to work without any additional investment – we disassembled the machine down to the last screw, and if anything showed signs of needing attention, we did so.
A repair invoice from FOREST SERVICE for 12000 eur. net is available for review.
The machine includes a new set of cutters - 32 pieces.
I'm including two additional sets of cutters - 64 pieces + 10 pairs of cutter holders.
Testing is available upon inspection.
Price: 48000 EUR net + 23% VAT
Location: Bielsko-Biała Tel: +48 515-151-614