جديدة حاوية السماد Marco-Polo Güllefass / Slurry tanker / Tonne à lisier / Wóz 20 000 l

Marco-Polo Slurry Tanker MPR-2S/20000

Standard Equipment:

Chassis:
Frame construction
D-50 drawbar eye, bolted
Rigid metal drawbar, powder-coated
Tractor coupling via lower transport hitch
Mechanically adjustable support leg

Running Gear:
Two-axle wheelset, rear axle steerable
Wheels 600/50-22.5
Pneumatic brakes, dual / single circuit

Tank:
Pressurized tank, 20,000 L capacity
Two internal reinforcement rings from channel steel
Hot-dip galvanized on both sides with additional passivation
Rear bottom hatch with Ø 600 mm manhole
Two 4″ glass sight glasses on front bottom hatch
Upper overflow nozzle at the highest point with overflow valve
Upper filling hatch Ø 210 mm
Anti-overflow baffle

Compressor:
Vacuum pump type 13500 MEC/M

Overfill protection:
Maximum vacuum: -0.94 bar
Two-ball overflow valve
Siphon shut-off valve with sight glass and drain valve

Safety Valves:
Safety valve (on compressor) 1 1/2″
Vacuum valve 1 1/2″
Pressure gauge D100, range -1/+1.5 bar
Oil recovery muffler
Tank Filling and Emptying System:

Nozzles and Valves:
Rear suction nozzle 6”, capped
Rear discharge nozzle 6”, 2-flange with hydraulic actuator; tilting discharge + connection for suction hose
Left side nozzle 6”, capped
Right side nozzle 6”, capped

Connection Accessories:
Galvanized quick coupling with flange for hose connection
Suction hose Ø 126 mm, length 6 m, with suction basket
Wide-angle slurry spreader, spreading width up to 14 m, version B

Electrical Installation:
Electrical and lighting installation according to traffic regulations, LED 12V + 1 beacon
Front white position lights
Rear lights with turn signals
Side reflectors – orange
Cable with 7-pin connector
Slow-moving vehicle triangular sign on rear bottom hatch
Nameplate, user manual, EC declaration / CE mark

Optional Paid Equipment:
Trailed hose applicators 3 - 18 m
Double-row tine applicators 4 - 6 m
Double-row disc applicators 3 - 4 m
Ski-type applicator 6 - 18 m
Three-point hitch for applicator mounting
Hydraulic mixer
Hydraulically adjustable drawbar
Hydraulic-pneumatic braking system, single axle
Hydraulic-pneumatic braking system, two axles
Turbo-filler
Suction arm + turbo-filler 8″
Immersion suction arm + turbo-filler 8″
Electrovalves + control panel
Hydraulic compressor control
Frame galvanization
Drawbar galvanization
Fender galvanization
K80 ball hitch
D-50 swivel eye hitch
Hydraulic support leg
Upper hatch with hydraulically operated funnel 6 - 8″
Side ladder with platform
Rear hatch hinged
Vertical filling indicator with 2″ valve
Single-color painting for galvanized tank
Suction hose 6″ Ø 150
Quick couplings 6″- 8″
D-60 hitch eye
K-80 hitch eye
D-50 swivel hitch eye
Manual support leg
Hydraulic support leg
Hand brake
Vacupress hoses 60 - 100 m
Flex hoses Ø 110 - 200 mm
8″ manual slide lever
Vacuum pumps 3,000 - 14,800 L/min

* Possibility of individual configuration